TM 5-3805-261-23-1
REAR WORK LIGHT MAINTENANCE - CONTINUED
0110 00
REMOVAL
9
1.
Remove screw (8) and disconnect wire assembly (9)
10
from work light (10).
8
2.
Remove nut (15), lockwasher (14), spacer (13), work
light (10), and spacer (11). Discard lockwasher.
3.
Remove two bolts (17), washers (16), and bracket
(12).
17
11
16
12
13
14
15
397-336
DISASSEMBLY
1
Remove screw (6), lens retainer (4), screw (7), lens
2
retainer (2), lamp (5), and molding (3) from housing (1).
3
4
5
7
6
397-337
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
ASSEMBLY
Install molding (3), lamp (5), lens retainer (2), screw (7), lens retainer (4), and screw (6) on housing (1).
INSTALLATION
1.
Install bracket (12), two washers (16), and bolts (17).
2.
Install spacer (11), floodlight (10), spacer (13), new lockwasher (14), and nut (15).
3.
Connect wire assembly (9) and install screw (8).
4.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0110 00-2
