TM 5-3805-261-23-1
BLACKOUT STOPLIGHTS-TAILLIGHTS AND MOUNTING MAINTENANCE
THIS WORK PACKAGE COVERS
Lamp Replacement, Removal, Disassembly, Cleaning and Inspection, Assembly, Installation
INITIAL SETUP
References
Maintenance Level
Unit
Equipment Conditions
Tools and Special Tools
Machine parked on level ground (TM 5-3805-261-
Tool kit, general mechanic's (Item 89, WP 0348 00)
10)
Parking/emergency brake applied (TM 5-3805-261-
Materials/Parts
10)
Rag, wiping (Item 35, WP 0349 00)
Implements lowered to ground (TM 5-3805-261-
Tag, marker (Item 44, WP 0349 00)
10)
Lockwasher (8)
Engine off (TM 5-3805-261-10)
Battery cables disconnected (WP 0125 00)
Packing, preformed (2)
LAMP REPLACEMENT
NOTE
This procedure covers maintenance of the right stoplight-taillight and mounting. Follow these instructions
for the left stoplight-taillight and mounting.
1.
Remove six screws (1), lens retainer (2), and preformed packing (4) from housing (3). Discard preformed packing.
2.
Remove and discard two lamps (5A) or LED (5B) by pushing in and turning left.
3.
Install two new lamps (5A) or LED (5B) by pushing in and turning right.
4.
Install new preformed packing (4), lens retainer (2), and six screws (1) to housing (3).
3
5A,5B
2
1
4
397-331
