TM 5-3805-261-23-1
BLACKOUT STOPLIGHTS-TAILLIGHTS AND MOUNTING MAINTENANCE - CONTINUED
0109 00
DISASSEMBLY - CONTINUED
3
3.
Remove two screws (19), lockwashers (18), and lamp-
holder (17). Discard lockwashers.
4.
Remove three screws (16), two plates (15), and six
retaining clips (14) from body (3).
14
15
16
17
19
18
397-333
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
ASSEMBLY
1.
Install six retaining clips (14), two plates (15), and three screws (16) on body (3).
2.
Install lampholder (17), two new lockwashers (18), and screws (19).
3.
Install two lamps (5A) or LED (5B) by pushing in and turning right.
4.
Install new preformed packing (4), lens retainer (2), and six screws (1) to housing (3).
INSTALLATION
1.
Install bracket (13), two washers (9), and bolts (10).
2.
Install blackout stoplight-taillight (6), two new lockwashers (12), and bolts (11).
3.
Install grommet (8) on two wire assemblies (7).
4.
Install grommet (8) and connect two wire assemblies (7) to main wiring harness in engine compartment.
5.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0109 00-3
