TM 5-3805-261-23-1
AIR PRESSURE SWITCHES REPLACEMENT - CONTINUED
0112 00
REMOVAL
NOTE
This procedure covers replacement of one air pressure switch. Follow these instructions for the other air
pressure switch.
Tag wire assemblies before disconnecting to aid in installation.
1.
Remove two screws (3) and disconnect two wire assemblies (2) from switch (4) located under right side of cab.
2.
Remove switch (4), bushing (5), and elbow (6) from brake control valve (1).
1
6
5
4
2
3
397-344
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
INSTALLATION
1.
Install elbow (6), bushing (5), and switch (4) on brake control valve (1).
2.
Connect two wire assemblies (2) and install two screws (3) on switch (4).
3.
Connect battery cables (WP 0125 00).
4.
Start engine. Check for leaks. Stop engine.
END OF WORK PACKAGE
0112 00-2
