TM 5-3805-261-23-1
ETHER STARTING AID ASSEMBLY REPLACEMENT - CONTINUED
0050 00
INSTALLATION - CONTINUED
4.
Connect hose assembly (15) to tube (14) in left side of
engine compartment.
4
5.
Position tube (8) in machine and connect to hose
assembly (15).
6.
Install clamp (19), washer (21), and bolt (20), securing
tube (8) in left-front, under fuel tank (4).
14
7.
Install clamp (16), washer (17), and bolt (18), securing
tube (8) in right-rear, under fuel tank (4).
15
16
17
10
8
18
19
20
21
397-157
8.
Install valve (11), two washers (13), and bolts (12) on
2
3
right-rear of fuel tank (4).
4
1
9.
If removed, install connector (10) on tube (8).
10.
Install tube (8) and connector (10) on valve (11).
11.
Install clamp (5), washer (6), and bolt (7), securing
tube (8) to fuel tank (4).
12.
Connect harness assembly (9) to valve (11) and bolt.
13
13.
Install clamp (3), two washers (2), and bolts (1).
12
11
10
5
9
6
8
397-156
7
14.
15.
END OF WORK PACKAGE
0050 00-5