TM 5-3805-261-23-1
PRIMARY FUEL FILTER/PRIMING PUMP AND MOUNTING MAINTENANCE
(MODELS 130G, 130GSCE, AND 130GNSCE) - CONTINUED
0045 00
REMOVAL
NOTE
If only replacing the filter element, perform steps 1 and 2 of Removal, step 1 of Disassembly, step 8 of
Assembly, and steps 6 through 8 of Installation.
1.
Turn valve (11), in front-lower-right of fuel tank, to the right to shut off fuel.
2.
Hold nut (3) and loosen body (10) by turning left and remove body.
CAUTION
Cap all hose and tube ends to prevent contamination.
3.
Disconnect hose assembly (9) in front of fuel tank.
4.
Remove elbow (8), connector (7), preformed packing (6), and valve (5). Discard preformed packing.
5.
Disconnect hose assembly (12).
NOTE
Drain fuel left in primary fuel filter/priming pump into pan.
6.
Remove two bolts (2), washers (1), and primary fuel filter/priming pump (4).
7.
Remove elbow (13), two preformed packings (14), and adapter (15). Discard preformed packings.
2
1
3
4
56
15 14
7
8
14
13
9
10
12
11
397-143
0045 00-2
