TM 5-3805-261-23-1
TURBOCHARGER OIL LINES REPLACEMENT - CONTINUED
0033 00
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
NOTE
Lubricate all preformed packings with clean oil before installing.
1.
Install new preformed packing (19), elbow (18), and bolt (17) in injection pump support (8).
2.
Install new preformed packing (16) on tube assembly (15).
3.
Install tube assembly (15) in elbow (18) under turbocharger (7).
4.
Install new gasket (14) between flange of tube assembly (15) and under turbocharger (7).
5.
Install two bolts (13).
6.
Install new preformed packing (12) and adapter (11) on injection pump support (8).
NOTE
Do not tighten nut.
7.
Install tube assembly (10) by connecting tube assembly nut.
8.
Install new gasket (9) between flange of tube assembly (10) and top of turbocharger (7).
9.
Install bolts (1 and 2).
2
1
10.
Tighten tube assembly nut on injection pump support
(8).
11.
Install four clips (5), two bolts (6), four washers (4),
3
and two nuts (3) on right side of engine.
4
5
4
6
397-2020
12.
Turn battery disconnect switch to ON position and start engine (TM 5-3805-261-10).
13.
Check for leaks and add oil as required. Stop engine.
14.
Install right side engine panel (WP 0182 00).
END OF WORK PACKAGE
0033 00-3
