TM 5-3805-261-23-1
TACHOMETER DRIVE REPLACEMENT (MODELS 130G, 130GSCE, AND 130GNSCE) - CONTINUED 0034 00
REMOVAL - CONTINUED
6
3.
Remove seal (8) and preformed packing (9) and dis-
card.
4.
Remove speedometer adapter (7) from adapter assem-
bly (10).
5.
Remove dust cap (6).
7
8
10
9
397-1342
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with
INSTALLATION
1.
Install dust cap (6) on speedometer adapter (7).
2.
Install speedometer adapter (7) on adapter assembly
(10).
3.
Install new preformed packing (9) on groove of
adapter assembly (10). Apply clean oil to outer sur-
face.
4.
Install new seal (8).
5.
Install tachometer drive assembly (5) on fuel injection
pump rear governor housing (1). Align shaft of
adapter assembly (10) with shaft in rear governor
5
housing.
1
6.
Install clamp (2), new lockwasher (3), and bolt (4).
4
2
397-1341
3
7.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0034 00-2
