TM 5-3805-261-23-1
VALVE COVER BREATHER REPLACEMENT - CONTINUED
0032 00
REMOVAL - CONTINUED
10
5.
Remove bolt (9), washer (8), breather (4), and pre-
formed packing (11) from valve cover (10). Discard
preformed packing.
9
8
4
11
397-098
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
NOTE
Do not tighten bolt.
1.
Install new preformed packing (11), breather (4), washer (8), and bolt (9) on valve cover (10).
NOTE
Do not tighten clamps.
94
2.
Install two clamps (2) and hose (3) on breather (4).
3.
Install tube (1) in hose (3).
4.
Install clip (7), two washers (6), and bolt (5) on left
1 232
side of engine.
5.
Tighten two clamps (2).
6.
Tighten bolt (9) to 144 lb-in. (16 Nm).
6 7 6
397-2019
5
7.
Close left side engine door (TM 5-3805-261-10).
END OF WORK PACKAGE
0032 00-2
