TM 5-3805-261-23-1
OIL FILTER REPLACEMENT - CONTINUED
0025 00
REMOVAL
WARNING
Exercise care when working with hot oil or components saturated with hot oil. Allow to cool before han-
dling. Failure to follow this warning may result in injury to personnel.
NOTE
Place drain pan under filter element.
Remove and discard filter element (1) from oil filter head (3).
3
2
1
397-086
INSTALLATION
1.
Use clean oil to lubricate new filter element (1) seal (2).
2.
Install new filter element (1) to head (3). Hand tighten filter element an additional 3/4 turn after filter element makes
contact with head.
3.
Refill engine oil to proper level (WP 0024 00).
4.
Turn battery disconnect switch to ON position and start engine (TM 5-3805-261-10).
5.
Check for leaks. Stop engine. If leakage is evident, tighten filter element (1).
6.
Close left side engine door (TM 5-3805-261-10).
END OF WORK PACKAGE
0025 00-2
