TM 5-3805-261-23-1
OIL LEVEL GAUGE TUBE ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Equipment Conditions
Unit
Machine parked on level ground (TM 5-3805-261-
10)
Tools and Special Tools
Parking/emergency brake applied (TM 5-3805-261-
Tool kit, general mechanic's (Item 89, WP 0348 00)
10)
Materials/Parts
Implements lowered to ground (TM 5-3805-261-
Cap set, protective (Item 7, WP 0349 00)
10)
Rag, wiping (Item 35, WP 0349 00)
Engine off (TM 5-3805-261-10)
Tag, marker (Item 44, WP 0349 00)
Battery disconnect switch in OFF position (TM 5-
Sleeve
3805-261-10)
Air tanks drained (TM 5-3805-261-10)
References
Left side engine panel removed (WP 0182 00)
REMOVAL
1.
Remove oil level gauge (1) from left side of engine.
CAUTION
Cap all hose and tube ends and plug all open oil ports to prevent contamination.
NOTE
Tag all hose and tube assemblies before disconnecting to aid in installation.
2.
Loosen two nuts on tube assembly (2) at lower-left side of engine and remove.
1
2
397-088
