TM 5-3805-261-23-1
CHANGING ENGINE OIL - CONTINUED
0024 00
DRAINING
1.
Position drain pan under drain valve (2).
2.
Open valve (2) and allow oil to drain.
3.
Close valve (2) when oil is completely drained.
4.
Replace oil filter (WP 0025 00).
1
2
LEFT SIDE
397-1042
3
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
REFILLING
1.
Remove oil fill cap (1) and fill crankcase with clean oil. See WP 0020 00 for crankcase capacity.
2.
Check oil level on ENGINE STOPPED side of dipstick (3).
3.
Install fill cap (1).
4.
Turn battery disconnect switch to ON position and start engine (TM 5-3805-261-10).
5.
Check engine oil level on ENGINE RUNNING side of dipstick (3) at engine low idle when engine reaches normal oper-
ating temperature.
6.
If necessary, remove fill cap (1) and add oil until level is at FULL mark.
7.
Install fill cap (1) and shut down engine.
8.
Inspect for oil leaks.
Close left side engine door (TM 5-3805-261-10).
9.
END OF WORK PACKAGE
0024 00-2
