TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-8.
Circle Drive Check Valve. (Sheet 4 of 4)
INSTALLATION (cont)
9.
Operate circle drive control lever. Move
system through at least five full movements
of travel to bleed air from system.
10.
Stop engine.
11.
Inspect hose assemblies and connections
for leaks.
12.
Refill hydraulic tank to proper level. Refer
to LO 5-3805-261-12.
13.
Install frame cover (4), nine washers (3 and
2) and bolts (1, Figure 15-8).
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 15-8.
End of Task
15-24
