TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-8.
Circle Drive Check Valve. (Sheet 3 of 4)
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install valve assembly (19), three washers
(18) and bolts (17, Figure 15-9) from front,
left side of frame.
2.
Install new preformed packing (16) and
elbow (15).
3.
Install new preformed packing (14) and
connector (13).
4.
Connect hose assemblies (12 and 11).
5.
Install new preformed packing (10) and
connector (9, Figure 15-8).
6.
Install new preformed packing (8) and
connector (7).
7.
Connect hose assemblies (6 and 5).
WARNING
Only
a
qualified
operator
may
perform the next procedure. All other
personnel must clear the immediate
area. Failure to follow this procedure
may cause INJURY. If you are
injured,
seek
medical
aid
immediately.
8.
Start engine. Refer to TM 5-3805-261-10.
Go to sheet 4
15-23
