TM 5-3805-261-20
BODY, CHASSIS AND HULL ACCESSORY ITEMS MAINTENANCE. (cont)
14-8.
Front and Rear Defroster Fans and Mounting. (Sheet 2 of 6)
REMOVAL
NOTE
The
following
is
a
maintenance
procedure for the front defroster fan.
The maintenance procedure for the
rear defroster fan is identical.
1.
Remove four bolts (1) and lockwashers (2)
from left, front of upper cab. Support items
8 thru 41 as an assembly with one hand
when removing final bolt. Do not let items 8
thru 41 as an assembly hang by wire
assembly (4, Figure 14-17).
2.
Remove screw (3) from switch (11).
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
3.
Disconnect wire assembly (4).
4.
Remove items 8 thru 41 as an assembly.
NOTE
Remove plate from front defroster fan
only. Remove bolt, washer and plate
from rear defroster fan only.
5.
Remove bolt (5), washer (6) and plate (7)
from rear defroster fan only.
6.
Remove plate (7) from front defroster fan
only.
Figure 14-17.
Go to Sheet 3
14-28
