REMOVAL/LEFT SIDE - TM-5-3805-261-20

REMOVAL/RIGHT SIDE - TM-5-3805-261-20_817

REMOVAL/LEFT SIDE - TM-5-3805-261-20_819

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
768

TM 5-3805-261-20 BODY, CAB, HOOD AND HULL MAINTENANCE. 13-5. Engine Compartment Side Panels and Doors. (Sheet 4 of 10) REMOVAL/RIGHT SIDE 11. Remove four bolts (14), washers (15), two catches (16) and shims (17) from panel (26, Figure 13-11). 12. Remove four bumpers (18). 13. Remove two bumpers (19). 14. Remove four plugs (20). 15. Remove four rivets (21), by drilling out, and two handles (22, Figure 13-12). 16. Remove two rivets (23), by drilling out, and plate (24). NOTE Removal of seals will cause destruction of seals. Remove seals only if inspection indicates replacement is necessary. 17. Remove two seals (25) from panel (26). Discard two seals (25). Remove all old adhesive and seal material from mounting surfaces. REMOVAL/LEFT SIDE 18. Remove two grommets (27, Figure 13-13). 18. Disconnect hose assembly (30). 19. Remove bolt (31), washer (32) and clip (33) from top, center inside of panel (56, Figure 13-14). 20. Remove two nuts (34), washers (35), catch (36), shims (37), two bolts (38) and washers (39). Go to Sheet 5 13-11 Figure 13-12. Figure 13-13. Figure 13-14.

Privacy Statement
Press Release
Contact