TM 5-3805-261-20
BODY, CAB, HOOD AND HULL MAINTENANCE. (cont)
13-5.
Engine Compartment Side Panels and Doors. (Sheet 3 of 10)
REMOVAL/RIGHT SIDE (cont)
4.
Attach hoist and sling to panel (26, Figure
13-8). Wrap sling through door ports.
CAUTION
Bar will fall out from behind panel
when bolts are removed.
5.
Remove eight bolts (6), washers (7) and bar
(8).
CAUTION
Battery cables will be damaged if
caution is not exercised.
6.
Push two cable assemblies (2) through
holes in panel (27) and position in engine
compartment, (Figure 13-6).
7.
Remove items 9 thru 26 as an assembly.
8.
Remove hoist and sling.
9.
Remove 10 bolts (9), washers (10), two
items 11 thru 12 as assemblies and two
spacers (14) from panel (26, Figure 13-9).
NOTE
Removal
of
seals
will
cause
destruction of seals. Remove seals
only
if
inspection
indicates
replacement is necessary.
10.
Remove six seals (11) from two Door
assemblies (12, Figure 13-10). Discard six
seals (11). Remove all old adhesive and
seal material from mounting surfaces.
Go to Sheet 4
Figure 13-8.
Figure 13-9.
Figure 13-10.
Figure 13-11.
13-10
