TM 5-3805-261-20BODY, CAB, HOOD AND HULL MAINTENANCE.13-5.EngineCompartmentSidePanelsandDoors.(Sheet 6 of 10)REMOVAL/LEFT SIDE26.Remove six bolts (41), washers (42), items43 thru 44 as an assembly and spacer (45,Figure 13-16).NOTERemoval of seals will causedestruction of seals. Remove sealsonly if inspection indicatesreplacement is necessary.27.Remove three seals (43) from doorassembly (44, Figure 13-17). Discard threeseals (43). Remove all old adhesive andseal material from mounting surfaces.28.Remove two bumpers (45 and 46, Figure13-18).29.Remove two wing nuts (47), washers (48),cover assembly (49) and gasket (50).Discard gasket (50). Remove all gasketmaterial from mounting surfaces.30.Remove four rivets (51), by drilling out, andtwo handles (52).NOTERemoval of seals will causedestruction of seals. Remove sealsonly if inspection indicatesreplacement is necessary.31.Remove two seals (53) from panel (54).Discard two seals (53). Remove alladhesive and seal material from mountingsurfaces, if necessary.Figure 13-17.Figure 13-18.Go to Sheet 713-13
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
