TM 5-3805-261-20
BODY, CAB, HOOD AND HULL MAINTENANCE.
13-5.
Engine Compartment Side Panels and Doors. (Sheet 2 of 10)
REMOVAL/RIGHT SIDE
1.
Remove two grommets (1, Figure 13-6).
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends to prevent contamination.
2.
Position suitable drain pan under hose
assembly
(2)
and
disconnect
hose
assembly (2).
3.
Remove bolt (3), washer (4) and clip (5)
from top, center inside of panel (26, Figure
13-7).
WARNING
Weight of right engine compartment
panel
and
door
assembly
is
approximately 105 lbs. Use adequate
hoist and sling for lifting. Failure to
follow this procedure may cause
INJURY. If you are injured, seek aid
immediately.
CAUTION
Do not attach sling to handles for
lifting panel. Rivets may not support
weight of panel.
Figure 13-6.
Figure 13-7.
Go to Sheet 3
13-9
