TM 5-3805-261-20
BODY, CAB, HOOD AND HULL MAINTENANCE. (cont)
13-4.
Engine Hood Assembly. (Sheet 2 of 3)
REMOVAL
1.
Release four fasteners (4) from brackets by
pulling rings (5, Figure 13-2) down.
WARNING
Use adequate hoist and sling for
lifting.
Failure
to
follow
this
procedure may cause INJURY. If you
are
injured,
seek
medical
aid
immediately.
2.
Attach hoist and sling to hood (1, Figure 13-
3).
3.
Remove hood (1).
4.
Remove hoist and sling.
5.
Remove and discard 12 rivets (2, Figure 13-
4) by drilling out.
6.
Remove four plates (3) and fasteners (4).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 13-3.
Figure 13-4.
Go to Sheet 3
Figure 13-2
13-6
