TM 5-3805-261-20
TRANSMISSION MAINTENANCE.
8-5.
Transmission
Modulation
Control
Housing
(Sheet 3 of 6)
REMOVAL
NOTE
Lever is keyed to shaft.
4.
Remove bolt (10), key (11) and lever (12)
from shaft (16, Figure 8-11).
NOTE
Lever will come loose as shaft is
removed.
5.
Remove four bolts (13) and washers (14)
attaching housing (17, Figure 8-12) to
bracket of cab floor weldment.
6.
Remove lever (15), shaft (16) and housing
(17, Figure 8-13).
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
7.
Disconnect cable assembly (18) from
housing (17, Figure 8-14).
8.
Remove washer (19) and nut (20) from
cable assembly (18).
9.
Using an arbor press, remove bearings
(21 and 22) from housing (17, Figure 8-15).
Figure 8-15
Go to Sheet 4
8-19
Figure 8-11
Figure 8-12
Figure 8-13
Figure 8-14
