TM 5-3805-261-20
TRANSMISSION MAINTENANCE.
8-4.
Transmission Modulation Control. (Sheet 4
of 5)
ADJUSTMENT
1.
Loosen nut (8, Figure 8-6).
2.
Turn bolt (9) clockwise until bottomed out.
WARNING
Adjustment
must
be
made
with
engine running. Keep all personnel
away from vehicle.
Allow
only
operator on vehicle. Make sure
parking brake is applied. Failure to
follow this procedure may cause
INJURY.
3.
Start engine. Refer to TM 5-3805-261-10.
4.
Step on tread (3).
5.
Fully depress pedal (7, Figure 8-7) and hold
down until step 7.
6.
Pull lever (10) backwards to OFF position to
release parking brake.
7.
Move lever (11) backwards to first speed.
8.
Release tread (3, Figure 8-6) slowly until
wheels start to turn, then depress until
wheels stop. Hold in this position.
9.
Move lever (11, Figure 8-7) forward to
NEUTRAL position.
Figure 8-6
Figure 8-7
Go to Sheet 5
8-15
