TM 5-3805-261-20
TRANSMISSION MAINTENANCE.
8-5.
Transmission Modulation Control Housing
(Sheet 5 of 6)
INSTALLATION
8.
Install bolt (25) and nut (23) on pedal (24,
Figure 8-12). Do not tighten nut (23).
9.
Install housing (17) onto pedal (24).
10.
Tighten nut (23).
11.
Install four washers (14) and bolts (13)
supporting housing (17).
NOTE
For adjustment of cable assembly,
refer to Chapter 2.
12.
Install nut (20) and washer (19, Figure 8-
14).
13.
Connect cable assembly (18) on housing
(17).
14.
Install nuts (9 and 8) and end (7) on cable
assembly (18) inside housing (17, Figure 8-
10).
Figure 8-12
Figure 8-14
Figure 8-10
Go to Sheet 6
8-21
