TM 5-3805-261-20
TRANSMISSION MAINTENANCE
8-4.
Transmission Modulation Control. (Sheet 2
of 5)
REMOVAL
1.
Remove two bolts (1), washers (2) and
tread (3) from pedal (7,Figure 8-3).
NOTE
Washer is attached to boot with
adhesive. Do not separate washer
from boot unless replacement of
either part is necessary.
2.
Lifting up left front corner of rubber floor
mat, remove washer (4) and boot (5) as an
assembly from pedal (7, Figure 8-4). Return
floor mat to original position.
3.
Remove lower end of spring (6,Figure 8-5)
from bolt fastened to cab floor frame
weldment on outside of vehicle, under left
side of cab.
4.
Remove upper end of spring (6) from pedal
(7).
5.
Remove pedal (7).
Figure 8-4
Figure 8-5
Got to Sheet 3
Figure 8-3
8-13
