REMOVAL - TM-5-3805-261-20

Supplemental Steering Pump Power Leads - TM-5-3805-261-20_669

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
620

TM 5-3805-261-20 WIRING HARNESS MAINTENANCE. 7-136. Supplemental Steering Pump Power Leads. (Sheet 2 of 5) REMOVAL 1. Remove nut (1) and washers (2 and 3, Figure 7-224) from supplemental steering pump. NOTE All wire, cable and harness assemblies must be tagged before disconnecting to aid in installation. 2. Disconnect wire assembly (28) from supplemental steering pump. 3. Remove nut (4) and washers (5 and 6) from supplemental steering pump. 4. Disconnect wire assembly (32) from supplemental steering pump. 5. Cut and discard tie strap (7). 6. Remove nut (8) and washers (9 and 10, Figure 7-225) from supplemental steering pump. 7. Remove wire assembly (28) from supplemental steering switch. 8. Remove nut (12) and washers (13 and 14) from supplemental steering switch. 9. Disconnect wire assembly (11) from supplemental steering switch. 10. Remove nut (15), washer (16), clip (17) and bolt (18). Figure 7-225 Go to Sheet 3 Figure 7-224 7-357

Privacy Statement
Press Release
Contact