TM 5-3805-261-20
WIRING HARNESS MAINTENANCE. (cont)
7-132.
Horn Wiring Harness. (Sheet 2 of 3)
REMOVAL
1.
Remove items 1 and 2 as an assembly
from clip (5, Figure 7-216).
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
2.
Disconnect wiring harnesses (1 and 2,
Figure 7-217) at connectors.
3.
Remove two screws (3) from horn (4).
4.
Disconnect wiring harness (2) at terminals.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-217
Figure 7-216
Go to Sheet 3
7-344