TM 5-3805-261-20
WIRING HARNESS MAINTENANCE.
7-131.
Dome Light Resistor Wiring Harness. (Sheet
2 of 3)
REMOVAL
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
1.
Remove items 1 and 2 as an assembly
(Figure 7-214) from clip.
2.
Disconnect
resistor
harness
(1)
at
connector from light switch harness (2,
Figure 7-215) at connector.,
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-214
Figure 7-215
Go to Sheet 3
7-341