TM 5-3805-261-20
WIRING HARNESS MAINTENANCE. (cont)
7-129.
Cab Signal Light Lead. (Sheet 2 of 2)
REMOVAL
1.
Remove screw (1, Figure 7-212) from fuse
box, under right side of cab.
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
2.
Disconnect wire assembly (2).
3.
Remove wire assembly (2) from signal
flasher (3).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install wire assembly (2) on signal flasher
(3, Figure 7-212).
2.
Connect wire assembly (2) in fuse box.
3.
Install screw (1) in fuse box.
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 7-212
End of Task
7-336
