TM 5-3805-261-20
WIRING HARNESS MAINTENANCE. (cont)
7-130.
Dome Light Harness. (Sheet 2 of 3)
REMOVAL
1.
Remove screw (1, Figure 7-213) from cab
fuse box in upper right side of cab.
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
2.
Disconnect wiring harness (2) at terminal
from fuse box.
3.
Remove wiring harness (2).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-213
Go to Sheet 3
7-338
