TM 5-3805-261-20
WIRING HARNESS MAINTENANCE.
7-127.
Front Floodlight Lead. (Sheet 3 of 3)
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install clips (13 and 12) on wire assembly
(11, Figure 7-209).
2.
Install wire assembly (11) on vehicle.
3.
Connect main harness connector (10) to
wire assembly (11) at connector (9).
4.
Attach clip (14) to main harness connector
(10) and wire assembly (11) at connector
(9).
5.
Install bolt (8) through clip (13) on left side
of cab exterior.
6.
Connect wire assembly (11) to left floodlight
(7).
7.
Install lockwasher (6) and screw (5).
8.
Install bolt (4) through clip (12) on right side
of cab exterior.
9.
Connect wire
assembly
(11)
on
right
floodlight (3).
10.
Move floodlight back to original position and
tighten bolt.
11.
Install lockwasher (2) and screw (1).
NOTE
Return
130G
Grader
to
original
equipment condition.
End of Task
7-331
