TM 5-3805-261-20
WIRING HARNESS MAINTENANCE. (cont)
7-126.
Rear Defroster Lead. (Sheet 2 of 2)
REMOVAL
1.
Remove grommet (Figure 7-208) from rear,
upper right side of cab wall.
2.
Remove screw from fuse block.
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
3.
Remove wire assembly.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install wire assembly (Figure 7-208).
2.
Install screw in fuse block.
3.
Install grommet in rear, upper right side of
cab wall.
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 7-208
End of Task
7-328
