TM 5-3805-261-20
WIRING HARNESS MAINTENANCE. (cont)
7-120.
Air Pressure Switch Lead. (Sheet 2 of 2)
REMOVAL
1.
Remove two screws (1, Figure 7-202) under
right side of cab.
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
2.
Disconnect wire assembly (2) from two
switches (3).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Position wire assembly (2) on two switches
(3, Figure 7-202) under right side of cab.
2.
Install two screws (1).
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 7-202
End of Task
7-314
