TM 5-3805-261-20
WIRING HARNESS MAINTENANCE. (cont)
7-122.
Supplemental Steering Dump Valve Wiring
Harness. (Sheet 2 of 3)
REMOVAL
1.
Detach main harness and dump valve
harness (4) from clip (1, Figure 7-204).
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
2.
Disconnect main harness from dump valve
harness (4).
3.
Remove clip (1).
4.
Remove two screws (2) and lockwashers
(3) from dump valve switch.
5.
Remove dump valve harness (4).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-204
Go to Sheet 3
7-318
