TM 5-3805-261-20
SUPPLEMENTAL STEERING MAINTENANCE.
7-48.
Electronic Control. (Sheet 2 of 3)
REMOVAL
1.
Open right side engine door.
2.
Remove items 1 and 2 as an assembly
from two brackets (7, Figure 7-64) on inner,
right side of engine compartment.
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
3.
Disconnect two wire assemblies (1) from
sockets (2, Figure 7-65).
4.
Remove two nuts (3), washers (4) and bolts
(5).
5.
Remove control (6).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-65.
Go to Sheet 3
7-121
Figure 7-64
