TM 5-3805-261-20
OPERATOR’S PANEL CONSOLE MAINTENANCE.
7-33.
Control Console. (Sheet 3 of 4)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Position two block halves (26, Figure 7-50)
together.
2.
Install four screws (25), washers (24) and
nuts (23).
3.
Install four washers (22).
4.
Position eight wire assemblies (21) on
screws (25).
5.
Install four lockwashers (20) and nuts (19).
6.
Position cover (18) and plate (17) on
operator’s panel console.
7.
Install washers (16 and 15) and bolt (14,
Figure 7-49).
8.
Install items 26 thru 19 as an assembly,
washer (13) and nut (12) on bolt (14).
9.
Install
cap
(13)
and
plug
(10).
Go to Sheet 4
7-93
