TM 5-3805-261-20
OPERATOR’S PANEL CONSOLE MAINTENANCE. (cont)
7-33.
Control Console. (Sheet 2 of 4)
REMOVAL
1.
Remove screw (1), washer (2), screw
(3), washer (4), lever (5), spring (6),
screw (7), washer (8) and base (9,
Figure 7-48) from centershift lock valve.
2.
Remove plug (10, Figure 7-49).
3.
Remove cap (11), nut (12) and washer
(13).
4.
Remove bolt (14) and washers (15 and
16).
5.
Remove plate (17) and cover (18,
Figure 7-50).
6.
Remove four nuts (19) and lockwashers
(20).
NOTE
All
wire,
cable
and
harness
assemblies
must
be
tagged
before disconnecting to aid in
installation.
7.
Disconnect eight wire assemblies (21).
8.
Remove four washers (22), nuts (23),
washers
(24)
and
screws
(25).
Separate two block halves (26).
Go to Sheet 3
Figure 7-48
Figure 7-49
Figure 7-50
7-92
