TM 5-3805-261-20
OPERATOR’S PANEL CONSOLE MAINTENANCE. (cont)
7-32.
Disconnect Switch. (Sheet 2 of 2)
REMOVAL
1.
Remove two nuts (1) and washers (2) from
disconnect switch (4, Figure 7-47).
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
2.
Disconnect two wire assemblies (3).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Connect
two
wire
assemblies
(3)
to
disconnect switch (4, Figure 7-47).
2.
Install two washers (2) and nuts (1).
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 7-47
End of Task
7-90
