TM 5-3805-261-20
CHARGING SYSTEM MAINTENANCE. (cont)
7-5.
Alternator. (Sheet 4 of 5)
INSTALLATION (cont)
Delco Remy Alternator
4.
Install pulley (14), washer (13) and nut (12)
on alternator (15, Figure 7-7). Tighten nut
(12) to 79 ft-lb torque.
5.
Position items 15 thru 12 as an assembly
(Figure 7-6) in rear, right side of vehicle.
6.
Install nut (11), washer (10) and bolt (9,
Figure 7-5). Do not tighten bolt (9).
7.
Install washers (8 and 7) and bolt (6). Do
not tighten bolt (6).
8.
Position two fan belts (5, Figure 7-4) on
pulley (14).
9.
Connect terminal assembly (4) to small
terminal on alternator.
10.
Adjust alternator. Refer to paragraph 6-44.
Figure 7-4.
Figure 7-7.
Figure 7-6.
Figure 7-5.
Go to Sheet 5
7-14
