TM 5-3805-261-20
CHARGING SYSTEM MAINTENANCE. (cont)
7-5.
Alternator. (Sheet 2 of 5)
REMOVAL
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
1.
Loosen bolts (6 and 9), but do not remove.
2.
Move alternator to release tension on two
fan belts (5).
3.
Remove two fan belts (5) from alternator
pulley (14).
4.
Remove bolt (6) and washers (7 and 8,
Figure 7-5).
5.
Support alternator with one hand and
remove bolt (9), washer (10) and nut (11).
Delco Remy Alternator
6.
Remove items 12 thru 15 as an assembly
(Figure 7-6).
Figure 7-6.
Go to Sheet 3
Figure 7-3.
Figure 7-4.
Figure 7-5.
7-12
