TM 5-3805-261-20
CHARGING SYSTEM MAINTENANCE.
7-5.
Alternator. (Sheet 3 of 5)
REMOVAL
Delco Remy Alternator
10.
Remove nut (12) and washer (13, Figure 7-
7).
11.
Using an alternator pulley tool, remove
pulley (14) from alternator (15).
Robert Bosch Alternator
12.
Remove items 16 thru 21 as an assembly
(Figure 7-8).
13.
Remove nut (16), washers (17 and 18) and
pulley (19, Figure 7-9).
14.
Remove key (20) from alternator (21).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
Robert Bosch Alternator
1.
Install key (20) and pulley (19) on alternator
(21, Figure 7-9).
2.
Install washers (18 and 17) and nut (16).
Tighten nut (16) to 75 ft-lb torque.
3.
Position items 21 thru 16 as an assembly
(Figure 7-8) in rear, right side of vehicle.
Figure 7-7.
Figure 7-8.
Figure 7-9.
Go to Sheet 4
7-13
