TM 5-3805-261-20
COOLING SYSTEM MAINTENANCE.
6-46.
Fan and Fan Drive. (Sheet 5 of 7)
INSTALLATION
4.
Lubricate new seal (23) by applying a light
coat of clean grease to lip of new seal (23)
in hub (19).
5.
Install bearing (24)- through opposite end of
hub (19) until contact with new seal (23) is
made.
6.
Install spacer (22) in hub (19).
7.
Fill cavity between bearings of hub (19) with
clean grease.
8.
Install bearing (18).
9.
Position hub (19) with assembled parts (22,
23, 24) on shaft (26).
10.
Position pulley (20).
11.
Install items 27 thru 18 as an assembly
(Figure 6-117).
12.
Install new preformed packing (17) on hub
(19).
13.
Install retainer (16) and two bolts (15).
14.
Position adapter (6) on fan (5).
15.
Install six washers (14) and bolts (13).
Figure 6-117.
Go to Sheet 6
6-165
