Transmission Oil Pump Pulley.

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
261

TM 5-3805-261-20 COOLING SYSTEM MAINTENANCE. 6-47. Transmission Oil Pump Pulley. (Sheet 2 of 2) REMOVAL 1. Remove five bolts (1), washers (2) and plate (3, Figure 6-119) from lower portion of radiator. 2. Remove four bolts (4) and washers (5) from pulley (6). 3. Remove pulley (6). 4. Remove and discard seal (7). CLEANING Clean all parts. Refer to Chapter 2. INSPECTION Inspect all parts. Refer to Chapter 2. INSTALLATION 1. Install new seal (7, Figure 6-119). 2. Position pulley (6). 3. Install four washers (5) and bolts (4).to pulley (6). 4. Position plate (3), install five washers (2) and bolts (]). NOTE Return 130G Grader to original equipment condition. Figure 6-119. End of Task 6-169

Privacy Statement
Press Release
Contact