TM 5-3805-261-20
COOLING SYSTEM MAINTENANCE.
6-46.
Fan and Fan Drive. (Sheet 3 of 7)
REMOVAL
NOTE
Remove bolts and washers only if
inspection indicates replacement is
necessary.
11.
Loosen four bolts (28, Figure 6-113).
12.
Remove two bolts (7), washers (8) and
mountings (9) and plate (10)
from
fuel tank.
13.
Lean bracket (29) forward.
14.
Remove six bolts (11) and washers (12)
between bracket (29) and fuel tank.
15.
Remove six bolts (13) and washers (14).
16.
Separate fan (5) and adapter (6).
17.
Remove two bolts (15) and retainer (16).
18.
Remove and discard preformed packing
(17) from hub (19).
19.
Position items 18 thru 27 as an assembly.
Stand on end of bracket (27) with hub (19)
pointing upward.
20.
Separate hub (19) and bearing (18). Using
soft hammer, drive down on hub (19) to
expose bearing (18, Figure 6-114).
21.
Remove bearing (18) and hub (19).
22.
Separate items 20 thru 27 as an assembly.
Figure 6-113.
Figure 6-114.
Go to Sheet 4
6-163
