TM 5-3805-261-20COOLING SYSTEM MAINTENANCE.6-43.CoolantPump. (Sheet 3 of 6)REMOVAL1.Loosen two clamps (1, Figure 6-104) fromfront, left side of engine.NOTEAll hose and tube assemblies must betagged before disconnecting to aid ininstallation. Cap all hose and tubeends to prevent contamination.2.Disconnect hose (13) from elbow (16) andslide up on tube.3.Remove two clamps (1).4.Loosen clamp (3) in front of coolant pump(20).5.Disconnect hose (2).6.Remove clamp (3).7.Remove connector (4), elbow (5) andbushing (6).8.Remove bolts (7 and 8).9.Support coolant pump (20, Figure 6-105).10.Remove two bolts (9).11.Remove two clamps (12) and hose (14)from pipe.12.Remove items 15 thru 20 as an assembly,gasket (10) and preformed packing (11) bydisconnecting from hose (14). Discardgasket (10) and preformed packing (11).Remove all gasket material from mountingsurfaces.13.Remove hose (13) from tube.Figure 6-105.Go to Sheet 4Figure 6-104.6-151
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
