TM 5-3805-261-20
COOLING SYSTEM MAINTENANCE. (cont)
6-41.
Radiator Drain Line. (Sheet 2 of 3)
REMOVAL
1.
Loosen two clamps (6) from hose (7).
2.
Remove hose (6) from fitting (8).
NOTE
All hose and tube assemblies must be
tagged before disconnecting to aid in
installation. Cap all hose and tube
ends to prevent contamination.
3.
Remove hose (7) and clamp (6) from
connector (5).
4.
Remove fitting (4) and connector (5) from
fitting (3).
5.
Remove valve (1), washer (2) and fitting (3).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 6-101.
Go to Sheet 3
6-144
