TM 5-3805-261-20
COOLING SYSTEM MAINTENANCE. (cont)
6-40.
Radiator Hoses, Lines and Fittings. (Sheet 4 of 6)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install new gasket (22) and pipe (21, Figure
6-100).
2.
Position two clamps (20).
3.
Install hose (19) on pipe (21) and water
pump.
4.
Tighten two clamps (20).
5.
Install bolt (18). Do not tighten bolt (18).
6.
Install two bolts (17) in upper mounting
holes of pipe (21). Do not tighten bolt (17).
7.
Position oil gage tube.
8.
Install two bolts (17).
9.
Tighten bolt (18) and two bolts (17).
Figure 6-100.
Go to Sheet 5
6-140
