TM 5-3805-261-20
COOLING SYSTEM MAINTENANCE.
6-40.
Radiator Hoses, Lines and Fittings. (Sheet 3 of 6)
REMOVAL
10.
Remove bolt (9), washer (10) and clip (11,
Figure 6-99).
11.
Loosen two clamps (12).
12.
Disconnect hose (15) and slide up on tube
(14).
13.
Remove two clamps (12).
14.
Loosen two clamps (13).
15.
Disconnect hose (16) and slide up on tube
(14).
16.
Remove two clamps (13).
17.
Remove bolt (14), clamp (15) and spacer
(16) from transmission to engine adapter
housing (17).
18.
Remove tube (18) with hoses (19) and (20)
connecting water pump to radiator.
19.
Remove hoses (19 and 20) from tube (18).
20.
Remove four bolts (21, Figure 6-100).
21.
Separate oil gage tube from pipe (25).
22.
Remove bolt (22).
23.
Loosen two clamps (24).
24.
Disconnect and remove hose (23) from pipe
(25) and water pump.
25.
Remove two clamps (24).
26.
Remove pipe (25) and gasket (26). Discard
gasket (26) and remove all gasket material
from mounting surfaces.
Figure 6-99.
Figure 6-100.
Go to Sheet 4
6-139
