TM 5-3805-261-20
BLADE MAINTENANCE. (cont.)
17-4.
Centershift Lock Assembly. (Sheet 4 of 5)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Coat inside surface of housing assembly
(16, Figure 17-9) with lubricating oil.
2.
Coat outside of pin assembly (15) with
lubricating oil.
3.
Position housing assembly (16) against
blade
lift
bar,
alining
holes
housing
assembly (16) with holes in blade lift bar.
4.
Install pin assembly (15) into housing
assembly (16) and blade lift bar.
5.
Install plug (11) into housing (12, Figure 17-
7), if removed.
6.
Install washers (10, 9 and 8).
7.
Install new preformed packing (14, Figure
17-6).
Figure 17-9
Figure 17-7.
Figure 17-6.
Go to Sheet 5
17-8
