TM 5-3805-261-20
BLADE MAINTENANCE. (cont.)
17-4.
Centershift Lock Assembly. (Sheet 2 of 5)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube
ends
and
plug
all
open
hydraulic
ports
to
prevent
contamination.
1.
Disconnect hose assembly (1, Figure 17-
4).
2.
Remove elbow (2) and adapter (3).
3.
Disconnect hose assembly (4, Figure 17-
5).
4.
Remove elbow (5).
WARNING
Spring is compressed under high
tension. Remove bolts slowly to
relieve tension on spring gradually.
Failure to follow this procedure may
cause INJURY. If injured, seek
medical aid immediately.
5.
Remove two bolts(6), washers (7), items 8
thru 12 as an assembly and spring (13,
Figure 17-6).
6.
Remove and discard preformed packing
(14).
Figure 17-4.
Figure 17-5.
Figure 17-6.
Go to Sheet 3
17-6