TM 5-3805-261-20
BLADE MAINTENANCE.
17-4.
Centershift Lock Assembly. (Sheet 3 of 5)
REMOVAL
7.
Remove three washers (8, 9 and 10) from
housing (12, Figure 17-7).
8.
Remove plug (11) from housing (12), if
necessary.
9.
Using a hammer and brass driver, strike pin
(15, Figure 17-8), to loosen it from lock bar.
10.
Remove pin assembly (15) and housing
assembly (16, Figure 17-9) from blade lift
bar.
Figure 17-7.
Figure 17-8.
Figure 17-9.
Go to Sheet 4
17-7
